Tennant T600 EE, Руководство оператора, Страница: 18 / 41

OPERATION
18
Tennant T600 EE (04-2018)
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
PRE-OPERATION CHECK LIST

Sweep area and remove any obstructions.
 Check the battery fluid. Fill as necessary.
 Check the battery charge level. Charge as
necessary.
 Check brushes/pads for wear and damage.
 Check scrub head skirt for wear and damage.
 Check squeegee blades for wear, damage and for
proper deflection adjustment.

Clean the squeegee drip trap reservoir.
 Check the squeegee vacuum hose for debris or
blockage.
 Confirm recovery tank is empty and clean.
 Confirm recovery tank debris tray is clean.
 Confirm recovery tank float shut-off screen is clean
 Check machine for proper operation.
OPERATING MACHINE
For control panel operating instructions, see
CONTROL PANEL OPERATION.
1. Turn the key to the on ( I ) position (Figure 31).
FIG. 31
2. Lower the squeegee assembly to floor by stepping
on foot pedal (Figure 32). To raise squeegee
assembly, place foot under foot pedal and lift. The
vacuum motor will automatically start when
squeegee is lowered to floor.
FIG. 32
3. Press the 1-STEP button to activate the scrub
function (Figure 33). The scrub head will lower to
floor.
FIG. 33
4. Push the directional lever forward to go forward
(Figure 34). Pull the lever back to go in reverse. Lift
squeegee assembly when reversing.
FOR SAFETY: Before operating machine, set
directional level before pulling start bail.
FIG. 34