OPERATION
19
Litter Hawk
t
330470 (6--99)
VACUUM FAN DAMPER HANDLE
The
vacuum fan damper handle
moves the
damper, directing vacuum power to the main
vacuum head or the vacuum wand. The handle
can be positioned with the operator’s hand if
walking behind the machine or by the operator’s
foot if riding the machine.
Vacuum wand: Turn the handle clockwise.
Main vacuum head: Turn the handle
counterclockwise.
THROTTLE LEVER
The
throttle lever
is located on the left rear side of
the machine. It controls the engine speed and
vacuum fan power. Raise the throttle lever until
desired engine speed/vacuum power is reached.
Idle: Push the lever all the way down to the idle
position.
Normal operating speed/vacuum power: Raise the
lever to the middle speed1 position. This position
works well for light debris or dusty conditions.
Maximum operating speed/vacuum power: Raise
the lever all the way up to the speed2 position.
This position works well for heavier debris or wet
conditions.
VACUUM HEAD CONTROL LEVER
The
vacuum head control lever
is located on the
right rear side of the machine. It raises and lowers
the vacuum head. Raise or lower the lever until
the desired vacuum head position is reached.
Raised position: Lift the lever all the way up.
Lowered position: Push the lever all the way down
to the lowered position.
