Tennant 6100E, Руководство по обслуживанию

Страница: 142 / 228

SWEEPING
3--60
6100E 330255 (8--98)
MACHINE TROUBLESHOOTING
Problem Cause Remedy
Excessive dusting Vacuum fan off Press the main brush, vacuum
and filter shaker switch to the on
position
Brush skirts and dust seals worn,
damaged, out of adjustment
Replace or adjust brush skirts or
dust seals
Hopper dust filter clogged Shake and/or clean or replace
dust filter
Vacuum hose damaged Replace vacuum hose
Vacuum fan failure Contact Tennant service
personnel
Poor sweeping performance Brush bristles worn Replace brushes
Main and side brushes not
adjusted properly
Adjust main and side brushes
Debris caught in main brush drive
mechanism
Remove debris from drive
mechanism
Main brush drive failure Contact Tennant service
personnel
Side brush drive failure Contact Tennant service
personnel
Hopper full Empty hopper
Hopper lip skirts worn or damaged Replace lip skirts
Wrong sweeping brush
Contact Tennant representative
for recommendations
Large debris trap damaged Repair or replace large debris trap
No machine power Power kill switch on Turn kill switch clockwise until it
pops up. Turn machine off and on.
Low battery power Check and charge batteries
Hopper dust filter clogged Shake and/or clean or replace
dust filter
Low machine power Low battery power Check and charge batteries.
Machine does not propel Power kill switch on Turn kill switch clockwise until it
pops up. Turn machine off and on.
Low or dead batteries Check and charge batteries
Operator not in seat Sit in operator seat
Vacuum Wand does not
come on
Auto switch not adjusted Adjust switch
Low battery power Check and charge batteries
Wand holding bracket bent Straighten bracket