Tennant 6100E, Руководство по обслуживанию, Страница: 120 / 228

SWEEPING
3--38
6100E 330255 (9--00)
LARGE DEBRIS TRAP SKIRT
The large debris trap skirt is located along the
front of the main brush. This skirt is raised and
lowered by the large debris trap pedal, allowing
larger debris to be trapped and swept up into the
hopper.
This skirt should be adjusted so it touches the
floor and is curled back, toward the main brush
(curl back should be 3/4 inch =/-- 1/4 inch).
Sweeping performance will be adversely affected
if this skirt does not contact the floor.
Check the skirt for wear or damage after every
100 hours of operation.
TO ADJUST FRONT FLAP SKIRT
FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake.
1. The front flap skirt must roll to the rear of the
machine .75 in (3/4 in) +/-- .125 in (1/8 in)