TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
excessive bandwidth utilization due to some users' excessive downloading activities so
that other users can have a guaranteed share of the bandwidth to enjoy a smooth
network. After you selected the Ingress/Egress (RX/TX) rates, click the “Apply” button to
activate them.
Fields on the above page are described as below:
Field Description
Port
Displays switch’s port numbers. Configuration of RX/TX rate on a specific
port can be made in the corresponding configuration box after the “port”
field
Ingress The packet RX rate of a corresponding port ranging from 5 to 155Mbps.
The default value is “No limit”
Egress
The packet TX rate of a corresponding port ranging from 5 to 155Mbps.
The default value is “No limit”
Note:
If the selected rate is higher than the actual link rate of the port, the value displayed on
the window is the selected value instead of the actual one.
3.3.4 Storm Control
To enter storm control configuration interface, click “Port Management”
→
“Storm Control”
as shown below.
This page displays the storm control status of broadcast, multicast and unknown unicast
- 19 -
