TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
Note:
1. The bandwidth of the monitoring port should equal or exceed the total bandwidth of the
monitored port(s).
2. Monitoring (mirror) port is usually connected to a terminal only. It can not be connected
to other devices (such as another switch).
3. If the monitoring port is just the monitored port, system automatically ignores the
monitored port.
3.3.3 Rate Limit
To enter Rate Limit interface as shown below, click “Port Management”
→
“Rate Limit” on
the navigation menu column.
Rate limit can be used to limit the TX and RX rates on each port. It can effectively avoid
- 18 -