TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
Note:
If you have enabled DHCP client, check the IP address assigned by DHCP server and then
re-connect switch. Don’t enable this function unless you are aware of the IP address
assigned by DHCP server. Please be careful when using it.
3.10.5 Restore Factory Default
To enter the page below, click “System Setting”—“Restore Factory Default".
This page allows you to restore switch’s default settings. To restore, click the “Apply”
button.
Note:
If you have modified switch’s default IP address, you still must use the default IP address:
192.168.0.1 to re-log on to the switch’s configuration interface after switch system
restores factory default values. Both default user name and password are “admin”.
3.10.6 Backup
To enter the page below, click “System Setting”—“Backup”.
- 44 -