TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
- 56 -
management VLAN.
7) Check whether the PC’s NIC has been set with a specific VID and the port connected
has been set with PVID filter.
8) Please contact technical support of our branch company at your place for help, if the
above mentioned can still not solve your problem.
4.4 Appendix 4: Useful Commands
Command Explanation
cmd
Run this command to enter the Windows command mode.
(Suitable for Windows 2000 or higher.)
ipconfig
Display the computer’s IP address.
ping
The most useful command in TCP/IP protocol. When it sends a
serial of packets to another system, the system will send back a
response. It is useful for checking remote host. The response
shows whether it can reach the host and how long it costs to
receive a response.
netstat
Run this command to check the current connection status of IP.
When your basic communication is processing, the system
service must be checked. The service includes checking the input
data or verifying the session.
tracert
Tracert command is used to display the path which the packets
pass through.
net stop
Stop Windows NT Network Service, such as net stop dnscache.
net send
Send messages to other network users or computers. You must
run messenger service to receive messages.
