Temperature Control Units : With ‘LS’ Series Instrument
Page: 52
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Service Department Fax: 317-885-8683
www.Temptek.com
8.
Remove the four mounting nuts. The instrument is now
loose and can be removed. To reinstall a factory issued
instrument, continue with step #9.
9.
Place the instrument into the panel mount, aligning the four
mounting stems. Once the instrument is aligned, tighten the
nuts to secure the instrument.
10.
Connect the sensor plug.
11.
Connect the ground terminals.
12.
Connect the large molex connector.
13.
The operator can now start the unit as outlined in section
3 of this manual. The operator must reconfigure (if
necessary) the instrument to restore the preferred operating
parameters.
Содержание VETERAN LS Series
