5
Setting up the Input Guard
Programming is accomplished over the phone and only has to be done once, unless it is
necessary to make a change. Before programming, do the following:
1 Connect a phone line and power, and then turn on the Input Guard.
2 From another phone line dial the number where the Input Guard is located. The device
will pick up after the first ring.
3 When prompted, enter the 4-digit PIN number (Factory default PIN number is 0000).
4 You will hear the Main Menu options (you may enter your selection at any time):
Programming Input Parameters
Each input can be programmed to be either a normally closed or normally open input.
Each input has its own time delay for which the input must have changed state for, before
the Input Guard begins making emergency calls. The time delay is programmed in minutes.
Each input has a unique Input ID message that can be recorded to give further detail during
emergency calls.
Option
Function
1
Status
2
To Set Limits (for inputs)
3
Program (telephone settings)
4
Turn On Relay (if relay option is enabled)
5
Turn Off Relay (if relay option is enabled)
0
Exit and Hang Up
Main Menu
