10
Programming the PIN Number
The Input Guard uses a 4-digit PIN number (0000-9999) to identify you when calling the
device or during callout procedures. After programming the PIN number write it down here.
_____________ Pin Number
The PIN number must be 4 digits and must not include a # sign.
1 From the Program Menu, press
5
to change the PIN number
2 You will hear “PIN number is 0000,
Press one to change.”
3 Press
1
if you wish to make a change or press any other button
to return to the Program
Menu
4 You will hear “
Enter your PIN number”
5 Enter a four digit number (do not put a # anywhere in your pin number)
6 You will hear the PIN number you just entered
7 You will be automatically returned to the Program Menu
Programming the Alarm Reminder Call
The Input Guard can make reminder calls after a programmable amount of time if inputs are
still active after the PIN number has been entered.
1 From the Program Menu, press 6
2 You will hear “Alarm
Reminder is Off,, press One to change”
3 Press
1
to enable Reminder Calls
4 You will hear “Alarm
Reminder is On, Time Delay is 60- minutes, press One to Change
”
5 Press
1
to set a custom time delay for the reminder call, or 2 to return to the program
menu.
6 You will hear “
Enter number followed by the # key.
”
7 Enter the delay in minutes (Valid times are 15 to 999 minutes), then press
#
.
8 You will hear the time you just entered.
9 You will be automatically returned to the Program Menu
