16
6. Skip the input ID message recording for now.
7. Program the phone number you are calling from into the first phone number
location. (See
Programming Telephone Numbers
)
8. Press ‘0’ twice to exit the Program Menu and hang up the Input Guard
9. Remove the terminal blocks to ensure input 1 will be open
10. The Input Guard will close the alarm relay, sound the buzzer, and call out
because input 1 is programmed to be normally closed and is currently open
If the Input Guard does not answer the phone
Verify that the phone line is working. Connect a standard phone to the line intended for the
Input Guard. Verify that there is a dial tone.
Check that the phone line is plugged in securely.
Verify that the Input Guard is powered up and the status light is blinking.
If the Input Guard does not call out
Verify that the phone line is good. Connect a phone to the line intended for the Input Guard.
Verify that there is a dial tone.
Check that the phone line is plugged in securely
Verify that the Input Guard is powered up and the display is on.
Verify that the Input Guard is programmed correctly. Call up the Input Guard and verify the
programmed phone numbers and inputs setup.
Call the input Guard. When it says “Enter your pin number” enter #999 and hang up right
away. The Input Guard will call all programmed phone numbers.
