19
Resetting VM606E back to DHCP
Turn the unit off with the power switch. Hold the Cancel Alarm
button down while turning the unit back on. LCD screen will
display “Release Pushbutton” with a 5 second countdown. Release
the button before 5 seconds. Screen will then display “Reset to
DHCP, No?” with a 5 second countdown. Press and release the
pushbutton again to change the No to Yes. Let the unit boot up
normally and the network adapter will be reset to DHCP mode and
will likely have a new IP address. If you see the LCD screen
below, it was successful.
Monitor Mode..5
Success!
Rec Bytes..23
