background image

21 

Limited Warranty: 

1.  Warrantor:  Dealer, Distributor, Retailer, and Manufacturer 

2.  Warranty and Remedy 

We believe that this is a high quality product.  Although we test all products for 
proper functionality, we cannot guaranty that there will never be a defective unit, 
or that a unit will function on every phone line and all communication equipment 
in existence.  For this reason, it must be clear that the 

Warrantors are not 

insuring your premises or guaranteeing that there will not be damage to 
your person or property if you use this Product.  

If this warranty is 

unacceptable please return the unused Product for a full refund. 

One Year Limited Warranty - Microtechnologies, Inc. warrants its products to be 
free from defects in material and workmanship under normal use for one year, 
and is not responsible for consequential damage or installation costs of any 
nature.   In event that the Product does not conform to this Warranty at any time 
during the period of one year from original purchase date, Warrantor will repair 
the defect and return it to you at no charge.

  Important:  The Warranty is 

limited to replacement of the Product ONLY.  

Secondly, because every 

phone line differs, we strongly encourage you to test this Product in its actual 
application.   This should include a full test, involving the Product actually dialing 
to its designated location and someone verifying the proper response. 

This warranty shall terminate and be of no further effect at the time the Product 
is 1) damaged by extraneous causes such as fire, water, lightning, etc. or not 
maintained as reasonable and necessary:  2) modified:  3) improperly installed:  
4) repaired by someone other than the Warrantor:  5) used in a manner or 
purpose for which the Product was not intended. 

WARRANTORS' OBLIGATION UNDER THIS WARRANTY IS 
LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT 
ONLY.  THIS WARRANTY DOES NOT COVER PAYMENT OR 
PROVIDE FOR THE REIMBURSEMENT OF PAYMENT FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

It must be clear that the Warrantors are not insuring your premises or 
guaranteeing that there will not be damage to your person or property if 
you use this Product

.  The Warrantors shall not be liable under any 

circumstances for damage to your person or property or some other person or 
that person's property by reason of the sale or use of this Product, or its failure 
to operate in the manner in which it is designed.  The Warrantor's liability, if any, 
shall be limited to the original cost of the Product only.  Use of this Product is at 
your own risk. 

3.  Procedures for obtaining performance for Warranty: 

    In the event that the Product does not conform to this Warranty, the Product 
should be shipped or delivered freight prepaid to a Warrantor with evidence of 
original purchase.  If in any way you are not comfortable with the product or its 
Limited Warranty, we encourage you to return it unused for a full refund. 

Содержание VM606























Отзывы: