11
Programming Warning Message Repetitions
During callouts the Input Guard will repeat the recorded ID message and warning conditions
a programmable number of times. (Default is 1, Valid numbers are 0,1,2)
1. From the program menu press 7.
2. You will hear “Warning reminder is 1, press 1 to change.” Press 1, and you will
hear “Enter number, followed by the pound (#) key.”
3. Press 1 to change or 2 to return to the program menu.
4. Enter the number of times (0,1,2) that you would like
the message repeated.
5. You will hear the value you entered and automatically be returned to the
program menu.
Programming the Relay Option
The external relay can be used for controlling another device rather than an alarm signal.
By default the relay changes state, with alarms. You can manually control it over the phone,
with the cancel alarm button (holding it for 10 seconds), or with the software by enabling this
option.
1. From the program menu press 8.
2. You will hear “Relay control is off, press 1 to
change.” Press 1, and you will
hear “Relay control is on”
3. You will be automatically returned to the programming menu.
