14
What happens during a call to voice number?
1 If you have recorded a Personal Identification Message, it will be played.
2 The Input Guard will report any alarm condition. For example "Alarm has been caused
by Input 1,
(Your prerecorded input ID message)"
3 The Input Guard will ask for the PIN number
4 Once a valid PIN number** has been entered, the Input Guard will not call again
because the current alarm condition has been acknowledged***. For units without the
relay option enabled, the alarm buzzer will turn off and alarm relay will de-energize. If
Alarm Reminder has been programmed, the Input Guard will begin making calls again
after the programmed amount of time.
**
If no pin number is entered, the Input Guard will wait 20 minutes and then begin
calling all programmed numbers.
***
It will call again if reminder calls are enabled and it stays in alarm.
What happens during a call to a pager?
The Input Guard will print your Local Identification number on the pager screen.
For example, 5551212, 5551212 is the Local ID.
The Input Guard will continue to make calls until either:
The alarm condition goes away OR
The Input Guard is called and the PIN number is entered
Calling the Input Guard to check the state of the inputs and power status
1. Call the Input Guard.
2. The Input Guard will report the following:
Any alarmed inputs
If the power is out
To check the state of an input and power
1. Call the Input Guard
2. Enter you PIN number
3. From the main menu press
1
4. You will hear “
Enter Input Number”
5. Enter the number of the input you wish to hear (i.e. 1)