13
Using the Input Guard
How does an input go into an alarm condition?
An input is in an alarm condition when its current state (on or off) is the opposite of
its programmed state for longer than the programmed time delay.
For example: Input 1 is programmed as normally off with a time delay of 1 minute.
Input 1 will be active when it is on for at least 1 minute.
What happens when an input goes into an alarm condition?
The Input Guard will close the alarm relay (unless the relay option is enabled)
The alarm buzzer will begin to sound.
The Input Guard will begin making emergency phone calls.
Pushing the Cancel Alarm button on the top of the Input Guard will cause the alarm buzzer
to turn off and the alarm relay to de-energize. After the Cancel Alarm button has been
pressed the Input Guard will stop making emergency phone calls until a new emergency is
present, unless the Reminder Calls function is enabled.
How do I activate and deactivate the relay? (assuming you enabled it, page 13)
1 Call the Input Guard
2 Enter you PIN number
3 From the main menu press
4
to activate the relay or
5
to deactivate the relay
or
Use the software to control it.
