up and the status light is blinking.
If the Monitor does not call out
Perform previous steps. Perform the “#999” test call operation on
the previous page.
Emergency Phone Call Sequence
Emergency Calls After
Power Outage 5 minutes
Temperature Immediately
All phone numbers are called. If the PIN number is not entered, the
monitor will wait 20 minutes and then begin calling all phone number
again.
Optional 20 / 30 Hour Extended Batteries
If your unit has been ordered with an extended battery, it is installed
at the factory. These batteries are trickle charged and can take up
to a week to reach full capacity. The battery is charging whenever
the monitor is powered on.
Some Helpful TIPS
•
If the Temperature Guard is having trouble receiving your pro-
gramming entries, try holding the button for a longer amount of
time.
•
Include all necessary digits for phone numbers. Long distance
numbers must include 1 and the area code.
•
Do not place the unit in direct sunlight as this will effect the tem-
perature and humidity readings.
•
Do not place the unit near heating or cooling sources if you wish
to monitor the average temperature of a room.
•
Placing the unit on the floor will cause the Temperature Guard to
sense a temperature that is lower then the actual ambient tem-
perature.
•
To monitor the power status of specific devices; connect the
Temperature Guard’s power plug into the same power source as
the device you wish to monitor. It is possible for an isolated
power outlet to lose power.
Technical Support
860-829-2710 M-F 9:00 am to 4:00 pm EST
13
