5
Programming Pager Related Values
The following instructions pertain to the Temperature Guard,
model VM500-3, and the Temperature and Humidity Guard,
model VM500-3HT.
Programming Pager Numbers
The Temperature Guard can call voice or pager numbers. Pager
numbers are programmed by programming a * as the first digit of a
telephone number.
1 From the Program Menu, Select
1
for the primary number,
2
for
the secondary number,
3
for the third number, or
4
for the fourth
number.
2 You will hear “
Enter number then press pound”
3 Enter * then enter the full pager number
(1 + area code if neces-
sary)
followed by the
#
key.
4 You will hear “
star
” and then the telephone number you just en-
tered.
5. You will be automatically returned to the Program Menu
Programming a Local Identification Number For Pagers
The local identification number is printed on the display of a pager
when the Temperature Guard calls a pager number. This number
can be up to 20 digits long.
1 From the Program Menu, press
5
for the local ID
2 If this is the first time setup, go to step 6
3 You will hear the programmed number
4 You will hear
“Press one to change”
5 Press
1
if you wish to make a change or press any other button
to return to the Program Menu
6 You will hear “
Enter number, then press pound”
7 Enter the number, followed by a
#
8 You will hear the number you just entered.
9 You will be automatically returned to the Program Menu
