Home Guard Description
The Home Guard monitors the temperature and power wherever it is
located, and dials up to two phone numbers if the temperature goes
below 45 degrees or it the power goes out for more than five min-
utes. It is perfect for monitoring homes while away for the winter.
Programming Overview
Programming the Home Guard is accomplished over the phone and
only has to be done once, unless it is necessary to make a change.
Before programming, do the following:
1 Connect a phone line, plug in the power pack to an outlet, and
connect the power jack.
Use of a phone and power line surge
suppressor is strongly recommended.
Turn the unit on by
moving the power switch from the position labeled 0 to the posi-
tion labeled 1.
2 From another phone line dial the number where the Home
Guard is located. The Home Guard will pick up after the first
ring.
3
The Home Guard prompts for the 4-digit PIN number.
Enter the
factory default PIN number, 0000
.
4 You will hear the Main Menu options. You may enter your selec-
tion at any time.
The Main Menu options are:
1. Status
2. Program
0. Hang Up
5 To access the Program Menu:
From the Main Menu, press 2
See Program Menu Directions on page 7
6
