Recording a Personal Identification Message
When the monitor calls out, it will first play the recorded personal
identification message. The message can be up to 10 seconds in
length.
1 From the Program Menu, press
6
2 If this is the first time recording a message, you will not hear
anything. Go to step 4
3 You will hear the recorded message
4 You will hear “
Press one to change”
5 Press
1
if you wish to make a change or press any other
button
to return to the Program Menu
6 If you press
1
you will hear a tone
7 Begin speaking after the tone. The Temperature Guard will re-
cord for up to 10 seconds.
8 After you are done recording, press any key to mark the end of
your message.
9 You will hear the message you recorded.
10 You will be automatically returned to the Program Menu
Programming Your PIN Number
The monitor has a programmable 4-digit PIN number (0000-9999)
to access the program menu, and to stop the monitor from making
emergency phone calls. The PIN number must be 4 digits and
must not include a # sign.
My PIN Number is
_____________
1 From the Program Menu, press
8
to change the PIN number
2 You will hear the PIN number (factory default is 0000)
3 You will hear “
Press one to change.”
4 Press
1
if you wish to make a change or press any other button
to return to the Program Menu
5 You will hear “
Enter number”
6 Enter a four digit number (do not put a # anywhere in your pin
number)
7 You will hear the PIN number you just entered
8 You will be automatically returned to the Program Menu
Enable / Disable the Temperature and Power Status Message
From the factory, the monitor prompts the caller for the PIN num-
ber before allowing the caller to hear the current temperature and
power status. This prevents anyone from learning that the home is
unoccupied. To have the monitor report the temperature and
9
