edged.
4 If the PIN is not entered, the Monitor will repeat the sequence
one time.
What happens if I call the Monitor while an alarm condi-
tion exists?
1 If the Status Message Before PIN Entry is Active, you will hear
either “Warning, the temperature is XX” or “Warning, the
power is out”, otherwise you will just hear “Enter your PIN num-
ber”
2 If the PIN number is entered, the monitor will stop making
emergency phone calls.
3 If the PIN number is not entered, the monitor continues dialing
the emergency phone numbers.
What happens when the Temperature Guard calls a
pager?
The Temperature Guard will print the Local Identification number
The Temperature Guard will print the temperature.
The Temperature Guard will then print the power status. 1 for
power on and 0 for power off.
Example, if you saw 1234
075
1 on the pager's display, 1234 is the
user ID, 075 indicates a temperature of 75 degrees, and the last 1
indicates power is on.
The Temperature Guard will continue to call the pager and any
other programmed phone numbers until either:
•
The alarm condition goes away OR
•
The Temperature Guard is called and the PIN number is en-
tered
•
The Temperature Guard calls a voice number and contacts a
person who enters the PIN number.
Reading the temperature from the blinking light
1 Wait for the light located next to the phone line to be on for ap-
proximately 2 seconds.
2 Count the number of blinks until the light is off for 1 second.
This number of blinks is the 10’s digit of the temperature.
3 Now count the number of blinks until the light is again off for 1
second. This is the 1’s digit of the temperature.
4 The temperature is calculated by: (multiply the number of
blinks counted in step 2 by ten and then add the number of
11
11
