TP-8/16/24/32/64S User Manual Version No.: V1.2
- 65 -
6.2 Detailed Explanations for Voice Command Usage
6.2.1 Compressed Chip Setting Command Set
You could go to compressed chip setting contents once entering “codec” command, see below:
＃
codec
Please input endpoint index (1 ~ 24): 1
In consideration of many ONU ports, so the subport displays port’s parameters. The host of parameters
are the global parameters, and the parameters showing in every port mode is the same as the set ones.
Including
Endpoint1 audio port: 4000
Endpoint1 T.38 port: 14000
The above two are different from the parameters shown in each port, and they can be set respectively.
CID mode setting command
codec_ep1> cid { parameter }
This command is used to set the caller ID display mode, parameter is “dtmf”or “fsk”.
Comfort noise setting command
codec_ep1> cn {parameter}
The parameter is only “enable” or “disable”, “enable” means to turn on the comfort noise function,
and “disable” means to turn it off.
DTMF mode setting command
codec_ep1> dtmf
DTMF Mode:
[1] In Band
[2] RFC2833
[3] RFC2833 Redundance
Input your choice[1~3]:
This command is set by way of interaction, and it will work if only the corresponding serial number is
chosen.
Command to cancel Echo switch setting
codec_ep1> ec {parameter}
The parameter is only “enable” or “disable”, “enable” means to turn on the echo canceling function,
and “disable” means to turn it off.
Fax mode setting command
