TP-8/16/24/32/64S User Manual Version No.: V1.2
- 25 -
Note: If one port shows “unregistered”, please check settings of corresponding port’s
parameters, and consult SIP soft switch platform.
3.9 Device Reboot
Click “System Maintenance
Device Reboot” that is in the left column.
After Voice gateway restart, use IE browser to log in Voice gateway once more via
LAN IP, check Voice gateway status, and confirm the operating WAN port information in
the status inquiry and confirm registration status in the user port status.
3.10 Telnet Login
Through Telnet to log Voice gateway gateway in the configuration interface. (after
the device is energized, LAN port’s default IP is 192.169.0.1 and subnet mask is
255.255.255.0). Carry out inband management to the device via command line
configuration.
Voice gateway gateway can Telnet to the configuration interface by LAN port and
WAN port Telnet. But WAN port’s IP address perhaps is dynamically acquired via DHCP
and PPPoE. So it may not be convenient for TELNET to visit. Therefore, it is suggested
that users go to the configuration interface from LAN port TELNET. Entering TELNET
needs to:
1.
Find a crossover cable or through line;
2.
Use a cable to link PC machine’s network card and LAN port together. If LAN
port’s LINK light flashes, it means PC machine has been connected with the
Device;
3.
Modify/add IP address of PC machine’s network card to be 192.169.0.x (X is an
integer more than 2 and less than 254), and mask to be 255.255.255.0;
4.
Open a command window on PC machine, and then
[Click WINDOWS’s <start> menu
－
>click <operation> to open the operation
window, then enter cmd or command in <opening> drop-down box, finally, click to
