TP-8/16/24/32/64S User Manual Version No.: V1.2
- 16 -
Figure 2-2 TP-64S Cable Connection Diagram
Warning: for operating safely, do not energize the device until all
cables of it are connected and installation inspection is finished.
Reminding: It is suggested to utilize single-phase three cord power
socket of neutral connector or multi-function microcomputer power
socket. The socket should be reliably grounded. Do not use power
extension cords.
2.
Cascade connection
Reminding:
In cascade connection, need to differentiate between primary
device and slave device
Turn on the Cascade Mode in primary device Web GUI
To keep the slave device software version is same with primary
device software version. Turn on the function to receive the
primary device testing packet in WAN port, and DO NOT turn
on the LAN port cascading mode in slave device. Then connect
slave device with primary device.
Warning:
Do not turn on LAN cascade in slave device.
After turn on the cascade mode in primary device, do not connect the
LAN port of primary device with local area network.
Take TP-64S cascading mode for example.
TP-64S primary voice gateway WAN port connects with upward ethernet network (like
