61
Event
:
Name
: custom name of the event. The name entered in this section is used for identification of
the given event within the program and in the event logs. The name should not be longer than
31 characters, and the following characters cannot be used: ^ ~ < > = | $ % " '.
Custom text command
: enter any text command which you want to send in a text message
(SMS) to the device’s phone number in order to generate the given custom event, and send report,
notifications and execute controls configured for the given event.
Type
: the type of the custom event, which can be new or restore. In the Contact ID protocol, new
events are indicated with 1 (or E), while event restorals are indicated with 3 (or R).
Remote monitoring
:
In this section you can configure the Contact ID event code for reporting to CMS and can select
the preconfigured notification template for the given event. The Contact ID event code should only
be configured if reporting to CMS is used, otherwise select the notification template named
“
EMPTY
”.
Event code
: in this section you can configure the 3-digit Contact ID event code, consisting of
characters 0...9,A,B,C,D,E,F, which you wish to assign to the given event.
The software includes a built-in event code
search tool which contains the list of
standard Contact ID codes. The search
tool opens by clicking on the
icon with
the question mark symbol placed in front of
the event code input field.
Using the event code search tool, you can
search for events by name or by event
code. For searching by name, start typing
the name of the searched event code in the
field under the “
Event name
” column
header. For searching by event code, start
typing the searched event code number in
the field under the “
Event code
” column
header. The search tool will filter the list
automatically according to the hits. You can select an event code by clicking on it in the list, then
the program will paste this automaticall
y into the event code input field after clicking on the “
OK
”
button.
Partition
: in this section you can configure the partition number you wish to assign to the given
event.
Zone
: in this section you can configure the zone number you wish to assign to the given event.
Notification template
: in this section you can select a preconfigured notification template which
you want to use for the given event. If you want to use additional notification templates, these
should be added prior to configuring the events. If you do not want to send a report to CMS on the
given event, select the template named “
EMPTY
”.
