50
Please note that the settings have to be written in the device in order to be applied after
a change is made. For this, click on the “Write”
button.
Event
:
Name
: custom name of the event. The name entered in this section is used for identification of
the given event within the program and in the event logs. The name should not be longer than
31 characters, and the following characters cannot be used: ^ ~ < > = | $ % " '.
Input
: the contact input, which will generate the given event.
Type
: the type of the event, which can be new or restore. New event will be generated when an
input is activated, and restore event will be generated when it reverts to its normal state.
In the Contact ID protocol, new events are indicated with 1 (or E), and event restorals are indicated
with 3 (or R).
Remote monitoring
:
In this section you can configure the Contact ID event code for reporting to CMS and can select
one of the preconfigured notification templates for the given event. The Contact ID event code
should only be configured if reporting to CMS is used, otherwise select the notification template
named “
EMPTY
”.
Event code
: in this section you can configure the 3-digit Contact ID event code, which you want
to assign to the given event. The event code consists of hexadecimal characters
(0...9,A,B,C,D,E,F). The default configuration for input event codes is 130, which means burglar
alarm.
The software includes a built-in event code search tool which contains the list of standard
Contact ID codes. The search tool opens by clicking on the
icon with the question mark symbol
placed in front of the event code input field.
Using the event code search tool, you can search for events by name or by event code.
For searching by name, start typing the name of the searched event code in the field under the
“
Event name
” column header. For searching by event code, start typing the searched event code
num
ber in the field under the “
Event code
” column header. The search tool will filter the list
automatically according to the hits. You can select an event code by clicking on it in the list, then
the program will paste this automatically into the event code
input field after clicking on the “
OK
”
button.
