56
- First data usage limit reached
:
this type of event is generated when the device data usage
reaches the limit configured in Megabytes in the
“
First data usage limit warning
” field.
Billing cycle date
: This field can be used to mark the day of the month on which the
mobile service provider resets and bills the amount of data used for the current month.
Data rounding unit
: This field can be used to configure the data rounding unit used by
your mobile service provider. This value will strongly influence the device’s monthly data
usage. You can check the data rounding unit for your data plan in the general terms and
conditions of your mobile service provider.
The “
Billing cycle date
” and “
Data rounding unit
” settings are common for the “
Second
data usage limit warning
” and “
Second data usage limit warning
” service events, i.e.
they use the same configured values. If you change these settings for one of the two
events, they will change automatically for the other event as well.
- Second data usage limit reached
:
this type of event is generated when the device data
usage reaches the limit configured in Megabytes in the
“
Second data usage limit warning
”
field.
- Settings changed:
this type of event is generated when the Superadmin user changes a
protected setting, that the Admin user has no access to. (which is disabled in the
“
Admin access
” menu.)
- SMS sending daily limit reached
:
this type of event is generated when the number of event
SMS messages sent by the device on the given day reaches the value configured at the
“
SMS sending daily limit
” option in the “
General
” device settings menu.
- SMS forwarding daily limit reached
:
this type of event is generated when the number of
incoming SMS messages forwarded by the device on the given day reaches the value
configured at the “
SMS forwarding daily limit
” option in the “
General
” device settings menu.
- Daily call limit reached
:
this type of event is generated when the number of calls initiated
by the device on the given day reaches the value configured at the “
Daily limit for calls
”
option in the “
General
” device settings menu.
Type
: the type of the event, which can be new or restore. New event will be generated when a
service event occurs, and restore event will be generated when it restores. In the Contact ID
protocol, new events are indicated with 1 (or E), while event restores are indicated with 3 (or R).
