OptiCon Micro
Installation and Operation Manual
35
3.3 Call Transfer
Description
Line calls can be transferred to other stations in the OptiCon Micro system. Calls can be transferred
announcing the call (screened) or without an announcement (unscreened).
When a Line call is transferred, the Transfer Recall Timer (30sec) is initiated. If the timer expires before the
call is answered, the Hold Recall process is initiated.
Users can transfer an active Intercom call to other stations in the wireless system, using either screened or
unscreened transfer. When used, the Intercom station is placed on Exclusive Hold, and the Transfer Recall
timer is initiated. If the timer expires before the Intercom call is answered, the call will bounce back (recall)
to the transferring station until answered or abandoned.
If “OFFNET FORWARD/TRANSFER” (Menu 1 5 3) for a station is set to “ENABLE”, the station can transfer
a call to an external destination.
Operation
While on a call, to perform a Screened Call Transfer:
LWS-BS station and LWS-WK
1. Press the
[Trans]
button.
2. Dial the station to receive the transfer.
3. When answered, announce the call.
4. Hang-up to complete the transfer.
To transfer a call to an external destination when “OFFNET FORWARD/TRANSFER” (Menu 1 5 3) is set to
“ENABLE”,
1. Press the
[Trans]
button.
2. Press desired the
[LINE]
button.
3. Dial the telephone number to receive the transfer.
4. When answered, announce the call.
5. Hang-up to complete the transfer.
GDC-400H/450H
1. Press the (
[Navigation
right] key) shorter than 1 second.
2. Dial the station to receive the transfer.
3. When answered, announce the call.
4. Press the (
[End]
key]) to complete the transfer.
To transfer a call to an external destination when “OFFNET FORWARD/TRANSFER” (Menu 1 5 3) is set to
“ENABLE”,
1. Press the (
[Navigation
right] key) shorter than 1 second.
2. Dial the Line access code.
