OptiCon Micro
Installation and Operation Manual
51
GDC-400H/450H
1.
Press the (
[Talk]
key).
2.
Press Dial the
{Voice mail}
code (ex. 620).
3.
Dial the Mailbox number (station number) and corresponding
password to receive the “Number of
Messages” prompt.
4.
Dial desired option code.
5.
At completion of session, press the (
[End]
key) to return to idle.
Conditions
1. Messages are retrieved in LIFO (Last in First out) order.
2.
The default password for voice mail is „*‟.
3. If the user removes the password for voice mail, access to the voice mailbox is not possible.
4. If password is lost or forgotten, first remove the password using the LWS-BS station and change
the password at his phone (refer to operation).
3.16.4.3 Remote Message Retrieval
Description
The system permits remote users access to their mailbox. After accessing the VSF Voice Mail, operation
follows the local procedures.
Operation
To access Voice Mailbox from a remote location
1. Lift the handset.
2. Dial the telephone number of a DISA assigned CO line assigned for answer by a Auto
attendant greeting.(refer to the 3.25.2 Auto Attendant Announcement)
3.
Upon answer, dial „#‟ to receive the “Enter password” prompt.
4. Dial the Mailbox number (station number)
and corresponding password to receive the “Number
of Messages” prompt.
5. Dial desired option code.
6. At completion of session, hang-up to return to idle.
Conditions
1. The conditions associated with Message Retrieval and Message Retrieval Options apply.
Programming
V
OICE SERVICES
Activate auto attendant
–
[Menu]
+ 2 3 1
Record auto atd greeting
–
[Menu]
+ 2 3 2
Auto atd destination
–
[Menu]
+ 2 3 7
