OptiCon Micro
Installation and Operation Manual
28
2.12 Terminal Registration and Termination
The LWS-BS controls the functional service and registration of the LWS-WK and GDC-400H/450H. First
of all, they should be subscribed to LWS-BS before used.
2.12.1 Subscribing the GDC-400/450H / LWS-WK to LWS-BS
Only one Wireless Handset or Keyset can be registered at a time.
2.12.1.1 Enabling Subscriptions
To enable registration of terminal the below procedure should be performed on the LWS-BS.
1. Press t h e
[Menu]
button.
2. Press
[Digit 1]
(CONFIGURATION submenu), or
Select
[1. CONFIGURATION]
using the Navigation up/down key and then press t h e
[OK]
soft button or Navigation „OK‟ key.
3. Press
[Digit 4]
(STATION REGISTER submenu), or Select
[4. STATION REGISTER]
using
the Navigation up/down key and then press t h e
[OK]
soft button or
„OK‟ key of the
Navigation.
4. Press
[Digit 1]
(REGISTER submenu), or Select
[1. REGISTER]
using the Navigation
up/down key and then press
[OK]
soft button or Navigation „OK‟ key.
5. Select the phone type using the Navigation left/right key (GDC-4XX or LWS-WK)
6. Press t h e
[OK]
soft button or Navigation „OK‟ key.
7. Wait for completing the subscription.
8. When the subscription is completed, t h e below message is shown on the LCD of the
LWS- BS.
STATION: 10X
SUBSCRIBED: SUCCESS
2.12.1.2 Subscribing GDC-400H/450H to the LWS-BS
To subscribe to the LWS-BS, below procedure should be performed on the GDC-400H/450H.
1. Press
[Menu]
(
,
) button to display the menu.
2. Highlight [Phone Register] the menu using the Navigation (
) button.
3. Press
[OK]
(
,
) button; a n d then the Phone Register menu will display.
4. Select
[LWS Subscription]
using the up and down arrows of the Navigation (
)
button and press
[OK]
( ,
) button.
5. Display
[Searching.1]
.
6. The system
[ RFPI (PARK): e.g. 01234567890123]
will display when a system is found.
The RFPI (PARK) of your system is available from your System Administrator or the
attendant.
7. Press
[OK]
(
,
) button; in a few second, a confirmation tone will be heard at the
GDC-400H/450H.
8. If the subscription fails, repeat the procedure from Step 1 to 7 at the LWS-BS and Step 1 to 7 from
the GDC-400H/450H.
