UC864
UC864
UC864
UC864----E/G/WD/WDU
E/G/WD/WDU
E/G/WD/WDU
E/G/WD/WDU AT Commands Reference Guide
AT Commands Reference Guide
AT Commands Reference Guide
AT Commands Reference Guide
80304ST10041a Rev. 6
80304ST10041a Rev. 6
80304ST10041a Rev. 6
80304ST10041a Rev. 6 ---- 2010
2010
2010
2010----0
00
05
55
5----20
20
20
20
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved.
Page 21 of 329
3.1.
3.1.
3.1.
3.1.
Definitions
Definitions
Definitions
Definitions
The following syntactical definitions apply:
<CR>
<CR>
<CR>
<CR> Carriage return character
Carriage return character
Carriage return character
Carriage return character, is the command line and result code terminator
character, which value, in decimal ASCII between 0 and 255,is specified within
parameter S3
S3
S3
S3. The default value is 13.
<LF>
<LF>
<LF>
<LF> Linefeed character
Linefeed character
Linefeed character
Linefeed character, is the character recognised as line feed character. Its
value, in decimal ASCII between 0 and 255, is specified within parameter S4
S4
S4
S4.
The default value is 10. The line feed character is output after carriage return
character if verbose result codes are used (V
V
V
V1
11
1 option used ) otherwise, if
numeric format result codes are used (V
V
V
V0
00
0 option used) it will not appear in the
result codes.
<...>
<...>
<...>
<...> Name enclosed in angle brackets is a syntactical element. They do not appear
in the command line.
[...]
[...]
[...]
[...]
Optional subparameter of a command or an optional part of TA information
response is enclosed in square brackets. Brackets themselves do not appear
in the command line. When subparameter is not given in AT commands which
have a Read command, new value equals to its previous value. In AT
commands which do not store the values of any of their subparameters, and
so have not a Read command, which are called
action type
commands, action
should be done on the basis of the recommended default setting of the
subparameter.
