Telit Wireless Solutions UC864-E Скачать руководство пользователя страница 192

Страница: 192 / 329

UC864

UC864----E/G/WD/WDU

E/G/WD/WDU

E/G/WD/WDU AT Commands Reference Guide

AT Commands Reference Guide

80304ST10041a Rev. 6

80304ST10041a Rev. 6 ---- 2010

2010

2010----0

5----20

Page 192 of 329

3.5.7.1.18.

Wake From Alarm Mode

Wake From Alarm Mode ---- #WAKE

#WAKE

#WAKE ---- Wake From Alarm Mode

Wake From Alarm Mode

AT#WAKE=

AT#WAKE=
[<opmode>]

[<opmode>]

Execution command stops any eventually present alarm activity and, if the
module is in alarm mode

alarm mode

alarm mode, it exits the alarm mode

alarm mode

alarm mode and enters the normal

normal

operating mode

operating mode.

Parameter:
<opmode>

<opmode> - operating mode
0 - normal operating mode; the module exits the alarm mode

alarm mode

alarm mode, enters the

normal operating mode

normal operating mode, any alarm activity is stopped (e.g. alarm tone
playing) and an OK

OK result code is returned.

Note: The "alarm mode" is indicated by hardware pin CTS

CTS

CTS to the ON

ON status

and DSR

DSR

DSR to the OFF

OFF

OFF status, while the "power saving" status is indicated by a

CTS

CTS - OFF

OFF

OFF ,DSR

DSR

DSR - OFF

OFF

OFF and USB_VBUS – OFF status. The normal operating

status is indicated by DSR

DSR

DSR – ON or USB_VBUS

ON or USB_VBUS

ON or USB_VBUS –

––

– ON status

ON status

ON status.

Note: during the alarm mode

alarm mode

alarm mode the device will not make any network scan

and will not register to any network and therefore is not able to dial or
receive any call or SM, the only commands that can be issued to the
MODULE in this state are the #WAKE

#WAKE

#WAKE and #SHDN

#SHDN

#SHDN, every other command

must not be issued during this state.

AT#WAKE?

Read command returns the operating status

operating status

operating status of the device in the format:

#WAK

#WAKE: <status>

E: <status>

where:
<status>

<status>
0 - normal operating mode
1 - alarm mode or normal operating mode with some alarm activity.

3.5.7.1.19.

Query Temperature Overflow

Query Temperature Overflow ---- #QTEMP

#QTEMP

#QTEMP ---- Query Temperature Overflow

Query Temperature Overflow

AT#QTEMP=

AT#QTEMP=
[<mode>]

[<mode>]

Set command has currently no effect. The interpretation of parameter
<mode>

<mode>

<mode> is currently not implemented: any value assigned to it will simply
have no effect.
Response format

AT#QTEMP?

Read command queries the device internal temperature sensor for over
temperature and reports the result in the format:

Содержание UC864-E










































































































































































































































































































































Результаты поиска

Содержание UC864-E

Отзывы:

Бренды по названию

Популярные бренды

Telit Wireless Solutions UC864-E, Справочное руководство

Результаты поиска

Содержание UC864-E

Отзывы:

Бренды по названию

Популярные бренды