Chapter 4: Beyond the Basics
TELEX SpinWise CD Duplicator
24
Verifying the Target (Duplicate) CDs
The
4.Verify
function is used to examine if the target CDs can be read correctly after copying.
How to Use the
4.Verfiy
function:
1.
Begin by copying a Master CD or data from a partition in the hard drive to a target (slave,
destination) CD. You can use the
1.Copy
function or the
3.Test and Copy
function to
do this. When the copy process is done, the system will automatically eject the
duplicated disc(s). Press the
ESC
button to redisplay the function and re-insert the
disc(s).
2.
Use the down-arrow button to display the
4.Verfiy
function and press the
OK
button to
start the Verify process. The SpinWise system will start to verify the CDs in the target
drives. The LCD Panel will display the verify process information and the results. It will
automatically open all disc drives of the verified discs when the process is complete.
Comparing the Source and Target after Copying
The
5.Compare
function compares the source CD and the target CD
after
copying.
How to Use the
5.Compare
function:
1.
Begin by copying a Master CD to a target (slave, destination) CD. You can use the
1.Copy
function or the
3.Test and Copy
function to do this. Press the
ESC
button to
redisplay the function.
2.
Ensure that the source and the copied target CDs are in their respective drives.
3.
Use the down-arrow button to scroll down to the
5.Compare
function, and press the
OK
button to start the Compare process. The LCD Panel will display the compare
information and the results. When the process completes, the target CDs will be
automatically ejected
4.
Press the
OK
button to view the
detail
of the Compare information. If the compare result
is identical, then the LCD Panel will display the message, “Identical.” If the result of the
compare process is “Fail” then the message will show the number of discs that failed and
succeeded. Press the
OK
button to view the
detail
of the Compare information. If the
compare failed, the LCD panel will display the reason of the failure such as “TOC not
match.”
5.
Press the
ESC
button to redisplay the
5.Compare
function.
