Chapter 3 The Basics
TELEX SpinWise CD Duplicator
18
Selecting the Source to Copy
From
(CD-ROM or Hard Drive)
Overview
This procedure explains how to change the source drive. The top drive is the
default drive when shipped.
Start with the
Initial Copy
Function
Displayed
1.
Turn on the system. Note that the
Copy
function is displayed. If your
last operation involved duplicating from a Master CD in the CD-ROM
drive, then the
Copy
function appears as follows:
If your last operation involved duplicating CDs from a hard disk
partition, then the last used hard drive partition will be displayed. For
example:
Select the
Source to
Copy From
2.
Use the down-arrow button to scroll to the
8. Select Source
function.
3.
Press the
OK
button to select the function.
Use the down-arrow button to select the source you wish to copy from.
For example, to select the hard drive as the source, select HDD:
To select one of the CD-ROM drives as the source, press the down
arrow button to cycle through the available source drives:
Src: CD-ROM
01 IDE0 Master
Src: HDD
00 IDE0 Master
1. Copy P: A
1. Copy
