TELEX SpinWise CD Duplicator
Chapter 3 The Basics
5
Chapter 3 The Basics
Overview
This chapter provides procedures for the most frequently used functions of the SpinWise CD
Duplicator, which are as follows:
Duplicating (Copying) a CD
Copying a CD to the Hard Drive
Duplicating from the Hard Drive
Copying Selected Tracks to the Hard Drive
Burning Composite CDs from a Hard Drive Partition
Selecting or Changing the Source (Master CD or Hard Drive)
Selecting a Specific Hard Drive Partition as the Source
Copying a Master CD
Overview
Duplicating (Copying) from CD to CD is the most frequently used function
of the SpinWise system. This procedure provides step-by-step instructions
for making duplicates from a Master CD.
The Copy
Function is the
Default
Function
1.
Turn on the system. Note that the
1.Copy
command is displayed. Your
LCD display should look like this:
The Master
(Source) Drive
2.
Place the Master CD in the
top
drive. This is the drive that functions as
the Master or “source” drive.
The Slave
(Destination )
Drive(s)
3.
Place one or more blank CDs in the remaining drives. It doesn’t matter
which drive(s) you use; the system will automatically detect which Slave
or “destination” drives have blank discs in them ready to be copied to.
1. Copy
OK
ESC
TELEX
SpinWise
