Chapter 3 The Basics
TELEX SpinWise CD Duplicator
10
Copying from a Partition on the Hard Drive (continued)
Insert Blank
CDs in the
Disc Drives
and Start the
Copy Process
6.
With the
Copy
function displayed in the LCD Panel, place blank CDs in
the available disc drives and press the
OK
button. The system will scan
for blank CDs and then write to those CDs, copying the data from the
displayed partition letter of the hard drive. Note that the CD drives that
are being written to from the hard drive have a red light, indicating that
the copy session is in progress. The status of the copy operation is
indicated in the LCD Panel Display.
In the following example, the “snapshot” shows that 44% of the data in
hard drive partition A, which includes 7 out of 15 total tracks, and 37
seconds of track 7 remain to be copied from the partition of the hard
drive:
Remove the
Duplicates
from the Disc
Drawers
7.
When the copy process completes, the disc drawers will automatically
open and the LCD Panel display will indicate the status. In the
following example, 7 CDs were successfully written to from partition A
of the hard drive:
Congratulations! You have learned how to use the hard drive to
make CD duplicates.
Exit the Copy
Function
8.
Press the
ESC
button and note that the system is still set to copy from
partition A unless you select a different source (using the
8. Select
Source
function).
1. Copy P: A
1. Copy P: A
OK: 07
Copy –A – 52X 44%
7/15 Trk 00:37
