i
Declaration of
Conformity.
Telex Communications, Inc
12000 Portland Avenue South
Burnsville, MN 55337
Equipment Information
Description: CD Duplicator
Model Number
Number of Drives
2-52 NH
2
3-52 H
3
3-52 NH
3
3-52 R
3
4-52 NH
4
6-52 R
6
7-52 H
7
SpinWise Duplicator products have been tested and found to comply with the Class A digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accordance with the instructions contained in this manual,
may cause harmful interference to radio and television communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning
equipment off and on, the user is encouraged to try correcting the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
You may find helpful the following booklet: How to Identify and Resolve Radio-TV Interference Problems. It
is available from the U.S. Government Printing Office, Washington, D.C. 20402, stock number 004-000-
00345-4.
Warning: Changes or modifications to this unit not expressly approved by Telex Communications, Inc.,
could void the user’s warranty.
Safety
Precautions
SpinWise Duplicator products are high-precision electronic devices. Do not use them in any manner other
than as specified in this manual. Please read this manual in its entirety before using the SpinWise system.
To prevent fire or shock, do not expose the unit to moisture or rain
To prevent electrical shock, do not attempt to disassemble the duplicator or any of its internal components.
Refer servicing to authorized personnel.
The internal drives utilize a laser beam that can be harmful to the eyes. Do not disassemble the unit. Do not
attempt to look through the front panel or into the unit while the power is turned on.
A user who changes or modifies the unit or operation procedures specified herein without express written
approval by the manufacturer will void the user authority to operate the equipment.
Specifications and features subject to change without notice or obligation.
CE
Certification
This product has been tested and complies with the requirements of:
The EMC Directive 89/336/EEC
EN55022: Radiated and Conducted Emissions A
EN55024: Generic Immunity ESD, RF, and Transient Susceptibility and Low Voltage Directive Product
Safety EN60950.
