Chapter 3 The Basics
TELEX SpinWise CD Duplicator
20
Selecting a Specific Hard Drive Partition as the Source
Overview
This procedure explains how to select a specific partition on the hard drive
as the source from which you will be copying from.
Start with the
Initial Copy
Function
Displayed
1.
Turn on the system. Note that the
Copy
function is displayed. If your
last operation involved duplicating from a Master CD in the CD-ROM
drive, then the
Copy
function appears as follows:
If your last operation involved duplicating CDs from a hard disk
partition, then the last used hard drive partition will be displayed. For
example:
Select the
Source to
Copy From
2.
Use the down-arrow button to scroll to the
8. Select Source
function.
3.
Press the
OK
button to select the function.
Use the down-arrow button to select the source you wish to copy from.
For example, to select the hard drive as the source, select HDD:
To select the CD-ROM drive as the source, select CD-ROM:
Src: CD-ROM
01 IDE0 Master
Src: HDD
00 IDE0 Master
1. Copy P: A
1. Copy
