TELEX SpinWise CD Duplicator
Chapter 4: Beyond the Basics
23
Chapter 4 Beyond the Basics
Testing (Simulating) the Copy Process
The
2.Test
function is used to simulate the copying process. When the simulation (test) finishes,
no data will be written to the CD.
How to Use the
2.Test
function:
1.
Use the down-arrow button to scroll down to the
2.Test
option.
2.
The system will test the source and the target destination. If using the CD-ROM as the
source, put a source CD into the CD-ROM (top disc drawer) blank CDs into the writers.
If using a partition on the hard disk, ensure the correct hard disk partition is displayed. If
you use rewritable discs that contain data, the old data will be quickly erased before
simulation.
3.
Press
OK
to start the simulation (test). The LCD Panel will display the testing
information and when the test ends, the LCD will show the results.
Testing and Copying CDs
The
3.Test & Copy
function is used to test the copying process and then actually copy the
source to the destination discs.
How to Use the
3.Test & Copy
function:
1.
Use the down-arrow button to scroll down to the
3.Test & Copy
function.
2.
The system will test the source and the target destination and then automatically start the
copy process. If using the CD-ROM as the source, put a source CD into the CD-ROM
(top disc drawer), and blank CDs into the writers. If using a partition on the hard disk,
ensure the correct hard disk partition is displayed in the LCD Panel along with the
Test
and Copy
function. If you use rewritable discs that contain data, the old data will be
quickly erased before testing and copying.
3.
Press
OK
to start the test and copy process. The LCD Panel will display the testing
information, the copy information, and the results. It will automatically eject the
duplicated CDs when the process is finished.
