38 Setup
C-2000 and C-2000HS Technical Manual
Bosch Security Systems, Inc.
Technical Manual
F.01U.174.927 Rev 03
Setup State 43
EMSTEL Enable/Disable (Special Software Option)
The
EMSTEL Enable/Disable
is used to enable/disable the EMSTEL mode of operation. This mode is to operate in
multi-party, 4-wire private network. It uses two (2) digit DTMF signaling.
Setup State option:
1=Enable
2=Disable*
To
enable/disable EMSTEL
, do the following:
1.
Select the
setup option
using FUP/FDWN keys.
2.
Press
Enter (#).
Display shows OC (Option Changed)
.
NOTE:
If SF Mode is enabled, EMSTEL Mode is disabled. Disable SF Mode before exiting setup mode.
Setup State 44 DTMF Sequence Entry
The
DTMCF Sequence Entry
is used to program the DTMF sequences which cause annunciation if received or is transmitted
when the D key is pressed and the sequence assignment number follows directly, providing the mode is enable
(see DTMF Sequence Enable/Disable and DTMF Keypad Enable/Disable).
NOTE:
When this feature is enabled, the D key is unavailable for normal DTMF use.
To
enter a DTMF sequence
, do the following:
1.
Select the
setup option
using FUP/FDWN keys.
2.
Press
ENTER (#).
3.
Enter the
DTMF sequence
.
Which is to be received or transmitted
.
4.
Press the
A
key.
Terminates the sequence.
Display will show OC (Option Changed)
.
Setup Option
Assignment
1
D00
2
D01
3
D02
4
D03
5
D04
6
D05
7
D06
8
D07
9
D08
10
D09
11
D10
12
D11
13
D12
14
D13
15
D14
16
Receive/D15