28 Setup
C-2000 and C-2000HS Technical Manual
Bosch Security Systems, Inc.
Technical Manual
F.01U.174.927 Rev 03
Setup State 17
Main Speaker with Handset Enable/Disable
The
Main Speaker with Handset Enable/Disable
allows receive handset audio to be played on the main speaker, as well as
the handset earpiece.
Setup State option:
1=Enable*
2=Disable
To
enable/disable the main speaker and handset
, do the following:
1.
Select the
setup option
using FUP/FDWN keys.
2.
Press
Enter (#).
Display shows OC (Option Changed).
Setup State 18 SF Mode Enable/Disable (Special Software Option)
2
The
SF (Single-Frequency) Mode Enable/Disable
setup state is used to enable/disable mode of operation. This mode
requires the device operate in a telephone station configuration with 4-wire analog supervision SF signaling.
Setup State option:
1=Enable
2=Disable*
To
enable/disable SF mode
, do the following:
1.
Select the
setup option
using FUP/FDWN keys.
2.
Press
Enter (#).
Display shows OC (Option Changed).
NOTE:
If SF Mode is enabled, EMSTEL Mode is disabled.
Setup State 19 Aux Speaker Enable/Disable
The
Aux Speaker Enable/Disable
setup state is used to enable/disable the auxiliary speaker capability.
Setup State option:
1=Enable
2=Disable*
To
enable/disable the auxiliary speaker capability
, do the following:
1.
Select the
setup option
using FUP/FDWN keys.
2.
Press
Enter (#).
Display shows OC (Option Changed).
2. This mode is not available unless activated at the factory. Once activated it will become a standard setup state.
