TELES VoIP Box BRI Series, Справочное руководство

Страница: 91 / 226

5 Additional VoIP parameters
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 91
VoipOad=<num>
( continued )
ƒ
If -<num>-\ is entered followed by a part of an OAD (not necessarily the first part), the
entered number of digits is cut from the OAD and the remaining OAD is searched for
the entered part. If it is found, the OAD will not be transmitted. If the string does not
match, the remaining OAD will be transmitted.
In the following example, the OAD is not transmitted.
EXAMPLE:
VoipOad=-3-\555
In the following example, the remaining OAD 5551212 is transmitted.
EXAMPLE:
VoipOad=-3-\444
ƒ
Enter -\x\y\ to replace the digits x by the digits y. x must be at the beginning of the
OAD. x and y can differ in length.
In the following example, the digits 517 are replaced by the digits 00517.
EXAMPLE:
VoipOad=-517\00517\
ƒ
Enter -\?\y\ to replace any first digits with y. ? is used as a placeholder for one digit. ?
and y can have different lengths.
In the following example, the first three digits are replaced by 00517.
EXAMPLE:
VoipOad=-???\00517\
ƒ
Use a semicolon to concatenate several
VoipOad
commands. The commands are pro-
cessed from left to right.
In the following example, the first three digits are removed from the beginning of the
OAD. In the remaining OAD, the first three digits are replaced by 444. The OAD
4441212 is transmitted.
EXAMPLE:
VoipOad=-3;-???\444\
NOTE: If the parameter is to be valid in only one direction, you must also set the pa-
rameter VoipOadIn or VoipOadOut.
Table 5.1 Customized parameters: protocol-independent VoIP signaling (page 3 of 5)
Protocol-Independent VoIP Signaling Parameters