6 Signaling and routing features
VoIPBox DSL / VoIPBox BRI – version 21.0.009
Page 128
In the following example, the digits 004930 are replaced with
030 followed by the remaining digits. The destination number
begins with 030 and is sent through port 10.
6.9 Setting sending complete byte in set-
up
In some cases the ISDN or H323 peer system may require this
byte for routing, or the byte may disrupt signaling.
Setting sending complete
The following entry ensures that the Setup includes a sending
complete:
The ) causes inclusion of sending complete in the ISDN Setup
or in the H323 Setup.
In the following example, all calls beginning with 0 are sent
with a sending complete to controller 9.
Removing sending complete
The following entry ensures that the Setup never includes a
sending complete:
Example 6.22
Setting default OAD 2
Restrict9004930=030 15
MapAll030=10030
MapAll<direct>=)<num>
Example 6.23
Setting sending complete
MapAll0=)90
MapAll<direct>=(<num>
Содержание VoIP Box BRI Series
