TELES VoIP Box BRI Series, Справочное руководство

Страница: 54 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 54
The configuration files follow these conventions: Individual
files are divided into sections. These sections always begin
with a line entry in square brackets. The basic required sec-
tions in these files are:
4.1 Configuration file ip.cfg
The basic settings for the two Ethernet interfaces are entered
here. Generally, these settings are entered once and then left
unchanged.
This file contains the following sections, which must appear in
the order given:
Table 4.2 Required Configuration File Sections
Section File Function
[System] pabx.cfg
route.cfg
ip.cfg
This section contains the system’s basic
settings.
[Night<num>]
EXAMPLE:
[Night1]
[Night2]
pabx.cfg
route.cfg
This section contains time dependent en-
tries that only apply for limited times.
[br0] ip.cfg
This section contains the IP configuration
for the Ethernet bridge of both Ethernet in-
terfaces.
Table 4.3 Sections in the ip.cfg File
Section Function
[System]
(required) This section contains entries that define the default gateway
and/or special routing entries.
[br0]
(required) The Ethernet controller section define the Ethernet bridge.
[eth1]
and
[eth2]
(instead of
[br0]
)
The Ethernet controller sections – to define every Ethernet in-
terface separately. These sections can be used as an alterna-
tive to the bridge section
[br0]
.
[httpd]
This section contains the port and access password parame-
ters for the graphical user interface.
[dsl]
(optional) These section contains settings for DSL interface.