TELES VoIP Box BRI Series, Справочное руководство

Страница: 67 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 67
rameter in the configuration, you must restart the system. Ta-
ble 4.10
→
list some settings for the controller parameter that
may be used on the VoIPBox DSL / VoIPBox BRI.
Table 4.10 pabx.cfg: Controller Parameters
Controller<port>=<address> <type> <mode> <line_type> FCT UNIT:<unit>
VALUE:<value> AUTOUP TRAP [SC | AC]
<port>
Defines the running (physical) port number.
<address>
Defines the configured (virtual) port address. In the default configura-
tion, the BRI TE port is 9, and the BRI NT port is 10. The VoIP port is 40.
<type>
Defines the connection type:
TE
external (Terminal Endpoint). Only the first controller
can be set as TE.
NT
internal (Network Termination). All NT ports must be
configured together to the right of the TE ports.
VOIP
VoIP module with different codec support.
VOIP SC
VoIP software module that supports only G.711.
DTMF virtual controller for activating DTMF tone recognition.
<mode>
Defines the protocol for BRI lines:
DSS1
<line_type>
Defines Point-to-Multipoint or Point-to-Point mode:
PMP Point-to-Multipoint
PP Point-to-Point
UNIT:<unit>
(Optional) Defines the currency for the charges (default EUR). Special
charge generation is possible for:
Switzerland
UNIT:&CH
NOTE: The <line_type> must be configured for these entries to
work.
EXAMPLE:
Controller02=10 NT DSS1 PMP UNIT: VALUE:0.010
Controller03=10 NT DSS1 PMP UNIT: VALUE:0.010
VALUE:
<value>
(Optional) For DSS1 NT ports only. Defines the charges that accumu-
late by unit. Enter the values in the following formats: x.y, x.yy, or x.yyy.
Default is 0.120.
AUTOUP
For TE-ports only: keeps ISDN layer 2 active all the time.
SC
Soft codec, only on VoIP ports if the coding is done by software mod-
ules. Do not change these settings. The configuration depends on the
VoIPBox DSL / VoIPBox BRI hardware. The following codecs are sup-
ported g711a and g711
μ .
AC
Hardware codec from AudioCodes, only on VoIP ports if the coding is
done by this codec vendor. Do not change these settings. The config-
uration depends on the VoIPBox DSL / VoIPBox BRI hardware of the 8
BRI box.