Telenetics Corporation FT100 S, Инструкция по установке и эксплуатации

Страница: 29 / 134

FT 100S 4-1
Chapter 4
Front Panel Option Selection
GENERAL
FT 100S configuration options, operating status, and diagnostics can be
observed or changed using the front panel pushbuttons with the LCD.
The unit can also be controlled by the control port described in
Chapter 6, or by the LocalView terminal when installed in the Local-
View shelf.
LCD MENUS
Three main menus provide
•
Port status displays
•
Diagnostic options
•
Configuration options
Each main menu is supported by submenus, items, and options.
While most menu items allow selecting different options, some only
display the current status of a signal or function. These provide status
monitoring for such features as receive signal frame synchronization
and alarm reporting.
Table 4-1 lists all menus.
Using the Pushbuttons to Select Options
Generally, pressing NO scrolls vertically down the columns in Table 4-1
and pressing YES advances horizontally across the columns. Pressing
HOME returns to the submenu or main menu header. If the pushbuttons
are pressed and held, the FT 100S automatically scrolls through the
menu at a rate of about 4 display advances per second. Options are
selected by pressing the YES/NO pushbuttons in answer to prompts or
questions. In some cases, option fields on the LCD blink. If this occurs
and the displayed selection for the option should be changed, press NO
to display another selection. If the displayed selection is the setting
required, press YES to select it and advance to the next option field or
submenu.