Telenetics Corporation FT100 S, Инструкция по установке и эксплуатации

Страница: 19 / 134

Installation
FT 100S 2-5
FT 100S to DTE
The 25-pin D-type female connector on the rear panel connect to the
DTE. Table 2-3 and Table 2-4 show pin connections for the optional
DTE connector available.
To connect the unit to the DTE,
1. Insert the DTE cable into the DTE connector on the unit.
2. Insert the opposite end into the designated DTE.
3. Secure the screws to complete the connection.
V.35 Adapter Installation
The V.35 adapter is provided with the FT 100S. Optional adapters are
available for converting the DTE connector to a 34-pin V.35 type
connector or to a 37-pin RS-449 type connector. You can use the
RS-449 adapter. The RS-449 adapter is not provided with the FT 100S.
Pin connections for the V.35 and RS-449 adapters are listed in Table 2-3
and Table 2-4.
Table 2-3. RS-530 / RS-449 Pin Functions
RS-530
(DB25) Pin
RS-449
(DB37) Pin
Function
1 1 Protective ground
2 4 Transmit data A
3 6 Receive data A
4 7 Request to send A
5 9 Clear to send A
6 11 Data set ready A
7 19 Signal ground
8 13 Receive line signal detect A
9 26 Receive clock B
10 31 Receive line signal detect B
11 35 External transmit clock B
12 23 Transmit clock B
13 27 Clear to send B