TBD-8100
© 2017
– Telefire Fire & Gas Detectors Ltd
Revision 1.00 November 2017
– Page 10 of 10 –
4
Specification
Operating Range
One prism .............................................................. 8 to 50 meters
Two prisms ............................................................ 50 to 75 meters
Four prisms ............................................................ 75 to 100 meters
Maximum detection area ............................................... 1,800 m
2
Prism
Dimensions (W / H / D) .......................................... 100 / 100 / 10 mm
Weight ................................................................... 75 g
Detector dimensions (W / H / D).................................... 76 / 99 / 144 mm
Detector weight ............................................................. 450 gr.
Operating Temperature range ....................................... -25°C
– +55°C
Relative Humidity Range .............................................. 10%
– 93% non-condensing
Nominal voltage supply ................................................. 24Vdc
Maximum current consumption (24Vdc)
Quiescence or Alarm State .................................... 20mA
during calibration.................................................... 50mA
Local Indication
normal status: HL4 LED flashes for 0.3 seconds once every 4 seconds
Alarm: HL4 LED constantly lit
Fault: The HL4 LED flashes every second
Error Message:
You can Figure out the type of fault by watching the combination of the HL1, HL2
and HL3 LED flashes, while the DIP SW 5 switch is raised.
Outputs ......................................................................... 2
Alarm output: Activated during
each alarm situation until “Return” is implemented
Fault output: activated during a fault until it is repaired
All values are nominal. Specifications are subject to change without prior notice
5
Certification
Telefire’s TBD-8100 Conventional Beam Detector has the following approvals:
SI 1220 Approved
GOST Approved
