27
To Set the Symmetry
Symmetry:
The percentage that the rising period takes up the whole Period.
Input Range:
0-100%
Default Value:
50%
1. Press Waveforms → Ramp → Symmetry, to set the symmetry.
The symmetry shown on the screen when the instrument is powered on is the
default value or the set value of last power down.
2. Input the desired Symmetry.
Use the numeric keyboard to input the parameter value directly, and press the
corresponding key to select the parameter unit. Or use the arrow keys to select
the digit to edit, and then use the knob to change its value. The generator will
change the waveform immediately.
Note:
The methods of setting other parameters of the ramp signal are similar to
the sine waveform function.
Figure 2-9 Setting the Symmetry
